Course Syllabus
MATERIAL REMOVAL PROCESSES
1.1 Introduction to machine tool.
1.2 Turning, milling, grinding
1.3 Drilling, boring and reaming
1.4 Machining Parameters ( Cutting Time, MRR)
CASTING PROCESSES
2.1 Introduction to Casting Processes of Ferrous and Non Ferrous Metals.
2.2 Sand Casting: Pattern, Mould Materials, Gating and Supporting System.
2.3 Die Casting: Hot and Cold Chambers, Injection System and Mould.
2.4 Casting Associated Defects.
METAL FORMING PROCESSES
3.1 Bulk and Sheet Metal Forming
3.2 Rolling and Forging
3.3 Extrusion and Wire Drawing
3.4 Punching, Blanking and Deep Drawing
METAL JOINING
4.1 Introduction to Joining Process
4.2 Gas Welding: Oxy-Acetylene Gas Welding.
4.3 Arc Welding: Shield Metal Arc Welding (SMAW),Gas Metal Arch Welding(GMAW), Submerged Arc Welding(SAW), Gas Tungsten Arc Welding (GTAW)
4.4 Resistance Spot and Seam Welding.
4.5 Welding Defects
4.6 Brazing and Soldering.
POLYMERIC PROCESSING
5.1 Thermoplast and Thermosets
5.2 Extrusion
5.3 Injection moulding
5.4 Blow moulding
5.5 Compression moulding
5.6 Thermoforming
CERAMIC PROCESSING
6.1 Introduction to Engineering ceramics.
6.2 Compaction and Sintering of Ceramic Powder.
Engineering Metrology
7.1 Introduction
7.2 Measurement Standards
7.3 Dimensional and Geometric Measurements
7.4 Errors and Uncertainties
1.1 Introduction to machine tool.
1.2 Turning, milling, grinding
1.3 Drilling, boring and reaming
1.4 Machining Parameters ( Cutting Time, MRR)
CASTING PROCESSES
2.1 Introduction to Casting Processes of Ferrous and Non Ferrous Metals.
2.2 Sand Casting: Pattern, Mould Materials, Gating and Supporting System.
2.3 Die Casting: Hot and Cold Chambers, Injection System and Mould.
2.4 Casting Associated Defects.
METAL FORMING PROCESSES
3.1 Bulk and Sheet Metal Forming
3.2 Rolling and Forging
3.3 Extrusion and Wire Drawing
3.4 Punching, Blanking and Deep Drawing
METAL JOINING
4.1 Introduction to Joining Process
4.2 Gas Welding: Oxy-Acetylene Gas Welding.
4.3 Arc Welding: Shield Metal Arc Welding (SMAW),Gas Metal Arch Welding(GMAW), Submerged Arc Welding(SAW), Gas Tungsten Arc Welding (GTAW)
4.4 Resistance Spot and Seam Welding.
4.5 Welding Defects
4.6 Brazing and Soldering.
POLYMERIC PROCESSING
5.1 Thermoplast and Thermosets
5.2 Extrusion
5.3 Injection moulding
5.4 Blow moulding
5.5 Compression moulding
5.6 Thermoforming
CERAMIC PROCESSING
6.1 Introduction to Engineering ceramics.
6.2 Compaction and Sintering of Ceramic Powder.
Engineering Metrology
7.1 Introduction
7.2 Measurement Standards
7.3 Dimensional and Geometric Measurements
7.4 Errors and Uncertainties
Frequently Asked Questions
Q1 : Do this subject has final examination?
A1 : Yes. This subject has final examination consists of 60 marks.
A1 : Yes. This subject has final examination consists of 60 marks.